Relevant Standard/相关标准

All the standard which is required for the crane is the DIN standard, FEM standard and Chinese

standard.

所有的起重机标准参考德DIN 标准、欧FEM 标准和中国国标。

DIN and FEM Standard as follows 主要DIN 和FEM 标准如下：

DIN 15018 and referenced standards

DIN15018 及相关标准

FEM calculation principles for hoist units

起升机构遵循FEM 计算标准

DIN and VDE regulations

DIN 以及VDE 电气标准

Weld seam quality is assured in conformity with DIN EN 5817

DIN EN 5817 焊接标准

DIN EN ISO 9001 Standard.

DIN EN ISO 9001 标准

Catalogue of main national standards for bridge crane as follows 行车主要国家规范如下:

GB/T 3811 – 2008 起重机设计规范“Design Rules for Cranes”

GB 6067 – 2010 起重机械安全规程第1 部分：总则”Safety rules for lifting appliances-Part1:General”

GB/T 5905 – 2011 起重机试验规范和程序“Cranes – Test code and procedures”

GB 5226.2 – 2002 机械安全机械电气设备第32 部分：起重机械技术条件“Safety of machinery –

Electrical equipment of machines – Part 32: Requirements for hoisting machines”

GB/T 10183.1 – 2010 起重机车轮及大车和小车轨道公差第1 部分：总则“Cranes – Tolerances for

wheels and travel and traversing tracks – Part 1: General”

GB/T 17908 – 1999 起重机和起重机械技术性能和验收文件“Cranes and lifting appliances – Technical

characteristics and acceptance documents”

GB 50278 – 2010 起重设备安装工程施工及验收规范“Code for construction and acceptance of crane

installation engineering”

JB/T 2603 – 2008 电动悬挂起重机“Electric under slung crane” only for EDKE, EHKE and ZHKE

JB/T 5317 – 2007 环链电动葫芦“Electric chain hoists” only for crane with chain hoist

JB/T 9008.1 – 2004 钢丝绳电动葫芦第1 部分：型式与基本参数、技术条件“Electric wire rope hoists

Part1: Type and basic parameter, specification” only for crane with rope hoist